30–40 kg/min Nominal Flow
Catalogue flow range; actual performance varies with fluid, viscosity, tube and operating conditions.
Portable drum & barrel fluid transfer
Oil Transfer Pumps Selected for the Fluid and the Job
Electric and cordless drum pumps with aluminum, 304 stainless steel or PE tubes. Share the fluid, container and duty requirements to confirm a suitable configuration.
Three Tube Materials
Choose aluminum, 304 stainless steel or PE according to the confirmed fluid and application.
Electric or Cordless
Select 900W mains-powered equipment or a 21V battery configuration for portable work.
Pump configuration
Start With the Fluid, Then Choose the Pump
“Oil pump” covers many applications. We use the fluid and container details to avoid recommending an unsuitable tube or seal.
Electric drum pump
900W for Workshop and Transfer Tasks
A mains-powered option for suitable oils and other confirmed fluids. Tube and seal compatibility must be specified before ordering.
| Power output | 900W |
|---|---|
| Power supply | 110–220V, 50/60Hz |
| No-load speed | 16000–20000 rpm |
| Nominal flow | 30–40 kg/min |
| Tube options | Aluminum, 304 stainless steel, PE |
Cordless drum pump
21V Battery Power for Portable Transfer
A cordless alternative for locations without convenient mains access. State the required battery and charger configuration in your inquiry.
| Battery platform | 21V lithium |
|---|---|
| Battery configuration | 10 × 2000mAh cells |
| No-load speed | 16000–20000 rpm |
| Nominal flow | 30–40 kg/min |
| Tube options | Aluminum, 304 stainless steel, PE |
Fluid compatibility is not universal. Diesel, alcohol, lubricating oil, water, acids, alkalis and other chemicals require explicit confirmation of fluid name, concentration, temperature, tube and seal material. Do not use the pump for flammable, hazardous or corrosive media unless suitability is confirmed in writing for the supplied configuration.
Pump selection questions
Oil Transfer Pump FAQ
Which tube material should I choose?
It depends on the fluid, concentration, temperature and required chemical resistance. Provide the exact fluid name and safety data sheet when available so the manufacturer can confirm tube and seal suitability.
Is the flow rate the same for every fluid?
No. The 30–40 kg/min figure is a nominal catalogue range, not a guarantee for all fluids. Viscosity, tube, suction height and operating conditions affect actual transfer performance.
What should I include in my inquiry?
Send the fluid, container size, required tube length, approximate transfer volume, power preference, quantity and destination. Photos of the container and current pump are useful for replacement orders.
Specification-based quotation
Get the Right Configuration and Price.
Send your preferred model, quantity and destination. Add shaft diameter and length, coupling, voltage or fluid details where relevant.
Phone / WhatsApp+86 135 2403 1615
Trade termsEXW · FOB · CIF on confirmed orders